Sources

Every claim on this site, with public sources to check it.

70 claims; 59 are confirmed by an independent public source (verified). The other 11 are Adam's own statements (self-reported), such as job titles and dates; each lists whatever public record supports it. Last checked .

For agents and scripts: the same data as claims.json (stable ids, one entry per claim, each with evidence URLs and what each source shows). GitHub account: adamdbrw; ORCID: 0000-0002-2130-0577.

Start here

The strongest independently verified claims:

Standards

Since 2018 his work has been taken up beyond his own company: the micro-ROS requirements (2018), the optimised SQLite recording defaults in ROS 2's rosbag2 (2021), the ROS Simulation Interfaces (shipped by Gazebo and NVIDIA Isaac Sim) and REP 158 (lead author; accepted by the ROS and Gazebo PMCs). verified #lede-direction

Summary of the claims micro-ros, rosbag2, simif-implementations, rep158-author and rep158-accepted.

Lead author of REP 158, 'OpenUSD Conventions for Simulation Asset Interoperability in Open Source Robotics', with co-authors from Robotec.ai, NVIDIA and Ekumen. verified #rep158-author

REP 158 was accepted by the Gazebo PMC (28 September 2026) and the ROS PMC (29 September 2026) and marked Accepted on 22 October 2026. verified #rep158-accepted

REP 158 has a public, Apache-2.0 compliance checker (ros-usd-check, shipped as OpenUSD validators) in ros-simulation/openusd-schemas, built by the Robotec.ai team (commits by Mateusz Żak and Maciej Majek). verified #rep158-tooling

Proposed the standardisation of ROS simulation interfaces (November 2024). verified #simif-proposal

Addisu Z. Taddese (GitHub azeey), Gazebo lead maintainer, replied on 15 November 2024: 'Thanks @adamdbrw for kicking this off. I do agree that having a standardized simulation interface would be good for the community.'

Lead author of the ROS Simulation Interfaces: wrote the first version (pull request #1: all 33 commits, squash-merged into one; 185 review comments from 13 reviewers, among them Gazebo and ROS maintainers), then developed them with NVIDIA contributors; most of the non-empty lines in the 38 interface definition files today are his: 72% by default git blame, 77% ignoring whitespace (-w), 83% also following moved and copied lines (-w -C) (November 2026), and he created 29 of the 38 files; listed as author and maintainer. verified #simif-design

The ROS Simulation Interfaces are implemented in Gazebo, NVIDIA Isaac Sim and O3DE, and released for ROS 2 Humble, Jazzy, Kilted, Lyrical and Rolling. verified #simif-implementations

The O3DE implementation is by Robotec.ai; Gazebo and NVIDIA Isaac Sim implemented the interfaces themselves. Gazebo's implementation (gazebosim/ros_gz#790, September 2025) was written by its lead maintainer, Addisu Z. Taddese.

More than 60 public GitHub repositories outside Robotec.ai declare the ROS Simulation Interfaces as a dependency (November 2026). About ten are simulators or simulator bridges, among them the MVSim simulator, OmniSim, community bridges for Genesis and Newton, and PyBulletFleet; others include the toolkit of the AI for Industry Challenge and its entrants' copies, and coursework. verified #simif-adoption

Count from a GitHub code search for simulation_interfaces in package.xml files, excluding Robotec.ai and the package's own repository; the search needs a GitHub login, so the listed files are the checkable sample.

Presented the new ROS simulation standard at ROSCon 2025 in Singapore with Ayush Ghosh (NVIDIA). verified #simif-roscon2025

Products

Conceived and designed Slingshot (2026), Robotec.ai's product that turns a site scan into a simulation-ready digital twin with OpenUSD output; wrote about 95% of the code (reconstruction with Gaussian splatting, people removal, camera calibration, object extraction, OpenUSD export) with an AI coding-agent harness he built; its OpenUSD exports are checked against REP 158. Technical details (his own statement): LiDAR-grounded 3D reconstruction trained region by region across GPUs, self-tested correction of camera calibration and timing errors, removal of people, object reconstruction, a native Rust core, OpenUSD output that opens in NVIDIA Isaac Sim and O3DE. self-reported #slingshot

The product is public; the source repository is private, so his share of the work and the REP 158 check are his own statements.

Open source

Conceived and directed RAI, an open-source agent framework for embodied AI (2024); co-author of its PAAMS 2025 paper. self-reported #rai

Directing RAI is Adam's statement; the public record shows him as presenter and co-author.

RAI is cited in later robotics research; RHO (2026) evaluates on RAI's O3DE benchmark. verified #rai-research-use

Relationships, for transparency: RHO's authors include two of Adam's ROSCon 2026 workshop co-presenters; the last author of ROSBag MCP Server chairs the COST Action in which Adam leads a working group. The other papers are by unrelated groups.

Wrote the RFC and first code of the O3DE ROS 2 Gem (2022) and is its top committer in the original repository; it is now the official O3DE robotics stack. verified #o3de-gem

Quoted in the Linux Foundation's 2023 announcement on Open 3D Engine in robotics, and a panelist in the Open 3D Foundation webinar on open source in robotics. verified #o3de-foundation

Co-created ROS 2 for Unity (first commit and #1 committer) and ros2cs (first commit); both ship inside AWSIM, the Autoware simulator; he architected and engineered Robotec.ai's first work on AWSIM (2022). verified #ros2-for-unity

The AWSIM role is his own statement.

Led rosbag2 recording-performance work (2020–2021): optimised SQLite defaults and the --regex and --exclude options, shipped in ROS 2, and the performance report. ROS 2 Galactic release notes: in a 200 Mbps stress test the Foxy release dropped up to 70% of messages, Galactic retained about 100%. verified #rosbag2

MCAP has been rosbag2's default storage since ROS 2 Iron; the SQLite plugin and the options remain.

First author of the founding scenarios and requirements of micro-ROS (EU project OFERA, 2018). verified #micro-ros

Roles

Maintainer (April 2023) and elected Chair (May 2023) of O3DE SIG-Simulation; no longer Chair or maintainer. verified #o3de-sig

The election is verified; that he no longer holds the role is his own statement.

Initial member of the OSRA Physical AI SIG (September 2025) and coordinator of its Embodied Agentic AI working group at the start; he has since left both roles. verified #osra-wg

The working-group page still lists him as coordinator; that he has stepped down is his own statement.

Founded the ROS Embodied AI Community Group (October 2024); he still leads it. verified #embodied-ai-cg

Leader of WG5 (Simulations & Standards) and Management Committee member for Poland in COST Action CA25178, 'Agentic Physical AI: Building the European Network for Agentic Embodied Intelligence' (API-Net), from October 2026. verified #cost

Independent Expert Evaluator for the European Commission since June 2018 (Horizon 2020, Horizon Europe): architecture, feasibility and execution risk of research proposals. self-reported #ec-expert

The European Commission does not publish evaluator lists by name.

Mentors Robotec.ai's technical leads in understanding customers' business needs, project management and leadership; mentors and develops engineers, including junior engineers, and drives the adoption of agentic coding with the harness he built for Slingshot; helped Robotec.ai's non-technical teams adopt agentic workflows. self-reported #mentoring

His own statement; Robotec.ai's CEO can confirm it.

Guest lecturer at the University of Warsaw: lectures at the Faculty of Mathematics, Informatics and Mechanics, and a lecture on large language models for linguists; Robotec.ai's client lead for the MIM UW team programming project 'Applying Large Language Models in Robotics for Anomaly Detection in Industrial Environments' (2023/24; day-to-day mentoring by his colleague Mateusz Żak); mentors Robotec.ai engineers in agentic software development. self-reported #teaching

The project and Robotec.ai's role are public; his role as client lead and the lectures are his own statement.

What others say

Addisu Z. Taddese, Gazebo PMC lead, on the proposal for the ROS Simulation Interfaces (November 2024): “Thanks @adamdbrw for kicking this off. I do agree that having a standardized simulation interface would be good for the community.” verified #quote-taddese

NVIDIA Technical Blog, on the ROS Simulation Interfaces in Isaac Sim 5.0 (August 2025): “Led by Robotec.ai and developed in collaboration with Gazebo, Open 3D Engine, and NVIDIA, these interfaces streamline integration by offering developers a consistent and simplified way to manage simulations directly from ROS 2.” verified #quote-nvidia-blog

Open Source Robotics Alliance, initiatives announced at ROSCon 2025 (October 2025): “Robotec.ai: Leading the development of new standardized interfaces for simulators” verified #quote-osra

Open Robotics, on LinkedIn (June 2026): “Adam Dabrowski from Robotec.ai is drafting a new Robotics Extension Proposal (REP) for REP-0158 OpenUSD conventions for simulation asset interoperability in open source robotics.” verified #quote-openrobotics

Ayush Ghosh, NVIDIA Isaac Sim team (February 2025): “The proposal to standardize simulation interfaces is both timely and critical for improving interoperability and user experience across different simulators. … thank you for driving this important conversation forward.” verified #quote-ghosh

Posted in the proposal issue Adam opened; it thanks the discussion rather than naming him.

Steve Peters, Gazebo maintainer, opening Gazebo's implementation work (April 2025): “Standard ROS interfaces have been defined for interacting with simulation in the ros-simulation/simulation_interfaces package, which has just had its 1.0.0 release by @adamdbrw. We should consider how to support these interfaces in Gazebo.” verified #quote-peters

ROS PMC minutes, recorded by Michael Carroll, then ROS PMC lead, and REP 158's PMC sponsor (September 2026): “REP 158 acceptance. … The proposal is well developed, has had substantial discussion on Discourse and GitHub, and no negative feedback has been raised.” verified #quote-carroll

Sam Haves, Google DeepMind, on REP 158 in the MuJoCo discussion (June 2026): “I'm excited about your proposal, particularly to bring ROS concepts under the USD umbrella seems like a great step forward thanks for getting the conversation going.” verified #quote-haves

The same comment cautions against duplicating the Newton schema in a neutral ext_physics layer; REP 158 dropped that layer after this feedback.

OSRA Technical Governance Committee minutes, recorded by Geoffrey Biggs, TGC chair (July 2025): “More standardization around some common service messages, originated out of the simulation interfaces work by Robotec and NVIDIA” verified #quote-biggs

Víctor Mayoral Vilches, on the call to found the ROS Embodied AI Community Group (October 2024): “Well done @adamdbrw taking the lead and attempting to unify AI/GenAI efforts.” verified #quote-mayoral

Emerson Knapp, rosbag2 maintainer, on Adam's SQLite double-buffering change (November 2020): “Thanks everyone for pushing this through - it looks great, this is a huge improvement for rosbag2.” verified #quote-knapp

Takatoki Makino, TIER IV simulation engineer, in Unity's AWSIM case study (June 2026): “‘ros2-for-unity’ enables as-is high-throughput low-latency utilization of the messaging formats and communication protocols used in actual cars, which allows us to reproduce simulations that are as close to real cars as possible.” verified #quote-tier4

Joe Speed, ROS Discourse (October 2021): “ROS 2 with @adamdbrw's ros2-for-unity gives a very large performance improvement (latency, throughput) to the SVL Simulator used by the Indy Autonomous Challenge university teams compared to its default ROS 2 bridge.” verified #quote-speed

NVIDIA Technical Blog (May 2025): “Spearheaded by Robotec.ai and developed in collaboration with Gazebo, Open 3D Engine, and NVIDIA, this new standardized interface simplifies integration…” verified #quote-nvidia-may2025

Customer case studies

Boliden: Digital twin of a large mining operation: replays recorded system data, supports predictive analytics and lets autonomous mining fleets be validated safely before deployment. His role: As CTO, directed the engineering. verified #case-boliden-twin

The case study is public on Robotec.ai's site; his role in it is his own statement.

Boliden: Kite Shield: a high-fidelity digital twin and mixed-reality environment of Boliden's underground tunnels and fleet, used to verify a UWB safety system's geofences and collision risks before it went live. His role: As CTO, directed the engineering (RoSi platform). verified #case-boliden-kiteshield

The case study is public on Robotec.ai's site; his role in it is his own statement.

TIER IV: Autoware's simulation realism and sensor validation; ROS 2 for Unity runs inside TIER IV's open-source AWSIM driving simulator. His role: architected and engineered Robotec.ai's first AWSIM work (2022) and co-created ROS 2 for Unity (2021); as CTO, directs the current work with TIER IV. verified #case-tier4

The case study is public on Robotec.ai's site; his role in it is his own statement.

Qualcomm: Photorealistic retail simulation for a mobile manipulator restocking shelves; synthetic data and hardware-in-the-loop validation confirmed real-time performance on Qualcomm edge hardware. His role: As CTO, directed the engineering. verified #case-qualcomm

The case study is public on Robotec.ai's site; his role in it is his own statement.

Analog Devices: Digital twin of a semiconductor production bay to validate robotic workflows, human–robot interaction and automation efficiency. His role: As CTO, directed the engineering (RoSi platform). verified #case-adi

The case study is public on Robotec.ai's site; his role in it is his own statement.

AWS: Cloud-native, high-fidelity robotics simulation at scale with Open 3D Engine and ROS 2: multi-robot scenarios and distributed sensor simulation. His role: As VP Robotics & Simulation; built on the O3DE robotics stack he started. verified #case-aws

The case study is public on Robotec.ai's site; his role in it is his own statement.

NVIDIA and Intrinsic: A ROS 2 standard simulation interface for interoperability across simulators, now in NVIDIA Isaac Sim and Gazebo. His role: Proposed the standard and is its lead author. verified #case-nvidia-intrinsic

The case study is public on Robotec.ai's site; his role in it is his own statement.

Apex.AI, ADLINK, Bosch and TIER IV funded and supported Robotec.ai's rosbag2 rewrite for the Indy Autonomous Challenge, making it 6x faster; shipped in ROS 2 Galactic. His role: led the rosbag2 performance work and wrote its report. verified #case-iac-rosbag2

Dexory adopted Robotec.ai's GPU lidar simulation (RGL) in Gazebo for its warehouse robots in 2023 (Guillaume Doisy, Lead Systems Architect: 'Working now!'), keeps its fork current in 2026 and contributed features back; it now runs on Robotec.ai's simulation stack. His role: directed and co-built that simulation stack, and directed the engineering behind RGL, as VP and then CTO. verified #case-dexory

The RGL adoption, fork and contributions are public on GitHub; that Dexory now runs Robotec.ai's simulation stack, and his role, are his own statement (Guillaume Doisy is a reference).

Robotec.ai's open-source simulation libraries are used by Autoware's AWSIM, Project PLATEAU (Japan's national 3D city-model programme; RGL for lidar simulation) and the OpenLoong humanoid project (ROS 2 for Unity). verified #adopters

Career

At Robotec.ai since its founding in 2019, after Robocar, its predecessor under the same CEO, from November 2017: Technical Lead (Nov 2017–Jun 2021), Principal Software Engineer (Jul 2021–Jan 2023), VP Robotics & Simulation (Jan 2023–Jul 2024, a department of six teams), CTO (since July 2024). He was among the first five people at Robotec.ai and has led its technology through its bootstrapped growth to 50 people. He mentors Robotec.ai engineers in agentic, AI-agent-driven software development. As CTO he owns the technology strategy and roadmap (open standards and open-source collaboration; a path from services to products such as the RoSi platform and Slingshot). self-reported #career-robotec

PIAP, Industrial Research Institute for Automation and Measurements (April 2014–April 2017; December 2017–March 2019, half-time in parallel with Robocar): Senior Software Engineer; software for mobile robots and operator consoles; EU robotics and space research projects; Autonomy group lead (11 people, robotics and deep learning); PIAP's project lead in R5-COP; project lead and main engineer in OFERA. self-reported #career-piap

R5-COP, a 30-partner EU (ARTEMIS) project on modular, ROS-based robots in which Adam was PIAP's project lead, won the ARTEMIS Exhibition Award at the ARTEMIS/ITEA Co-summit (Berlin, 10–11 March 2015); the exhibit featured PIAP's SCOUT robot and the DTI/MiR100 logistics platform. verified #r5cop-award

The award went to the project's exhibit, which featured PIAP's SCOUT robot. Adam's R5-COP role at PIAP is shown by the ARTEMIS Technology Conference 2016 agenda (see talk-2016-artemis).

Software engineer and system analyst 2005–2014: TLS-Technologie (2005–2007), Gadu-Gadu (2007–2008, C++/Qt client of Poland's most-used instant messenger), PZU, Poland's largest insurer, and Inter Polska (2009–2010, system analyst integrating information systems), GG Network (2011–2012), DCC Labs (2013, digital TV decoding), Deloitte Poland (2013–2014, risk-rating system for Poland's largest bank). self-reported #career-early

MSc in Information Technology, University of Warsaw. Languages: Polish (native), English, German. self-reported #education

Volunteer maths teacher for children from families in hardship (2009–2010). self-reported #volunteer-2009

Talks

ROSCon 2016, Seoul: 'Evaluating the resilience of ROS2 communication layer', with Rafał Kozik and Mateusz Maciaś (PIAP). verified #talk-2016

ARTEMIS Technology Conference 2016, Madrid, R5-COP project workshop (6 October 2016): opened it with the project overview, and gave the talks 'Modular approach to robot control' and 'Advanced and experimental human-machine interfaces'. verified #talk-2016-artemis

The agenda, marked as a draft, lists the opening as 'Opening / Key note, overview of the project'.

ROS Tooling Working Group, July 2020: rosbag2 performance findings. verified #talk-2020

ROS World 2021: 'Rosbag2 for Power Users', with Emerson Knapp. verified #talk-2021

ROSCon 2022, Kyoto: apple-picking robots demo in O3DE (demo, not a talk). verified #demo-2022

ROSCon 2023, New Orleans: 'Simulate robots like never before with Open 3D Engine'; Gazebo community meeting (Oct 2023); ROS Developers Podcast #128 (Nov 2023). verified #talk-2023

ROSCon 2024, Odense: 'Agent-based AI Framework for ROS 2', and the Embodied AI Birds of a Feather session; Warsaw.ai Episode XXIV (10 Oct 2024): 'AI Agent framework for robotics'. verified #talk-2024

Davos Tech Summit, 2 July 2026: main-stage keynote 'The Blueprint for Physical AI' in the session 'Foundation Models in Robotics'. verified #talk-2026-davos

One of three keynotes in a 45-minute main-stage session; the talk was not recorded.

ROSCon 2026, Toronto: co-presenter of the workshop 'Train, Simulate, Deploy: Agentic AI from Cloud to Robot' (one of five presenters). verified #talk-2026-roscon

Publications

Rachwał, K., Majek, M., Boczek, B., Dąbrowski, K., Liberadzki, P., Dąbrowski, A., Ganzha, M. RAI: Flexible Agent Framework for Embodied AI. In: Highlights in Practical Applications of Agents, Multi-Agent Systems and Computational Social Science: The PAAMS Collection (PAAMS 2025), Springer CCIS, pp. 195–206. verified #pub-rai

Rachwał, K., Majek, M., Boczek, B., Matejczyk, J., Matejkowski, D., Dąbrowski, A., Seyde, T., Amini, A., Ganzha, M. Multi-Agent Robotic Control with Onboard Vision-Language Models. Advances in Practical Applications of Agentic AI and Multi-Agent Systems: The PAAMS Collection (PAAMS 2026), Springer LNCS, pp. 427–432. verified #pub-vlm-2026

Maciaś, M., Dąbrowski, A., Fraś, J., Karczewski, M., Puchalski, S., Tabaka, S., Jaroszek, P. Measuring Performance in Robotic Teleoperation Tasks with Virtual Reality Headgear. AUTOMATION 2019, Springer, pp. 408–417. verified #pub-automation-2019

Czarnowski, J., Dąbrowski, A., Maciaś, M., Główka, J., Wrona, J. Technology gaps in Human-Machine Interfaces for autonomous construction robots. Automation in Construction 94 (2018), pp. 179–190. verified #pub-autcon-2018

Dąbrowski, A., Lütkebohle, I., Lange, R., Losa, J. M., Gamarra, B. O., Goenaga, I. M., Vilches, V. M. Reference Scenarios and Technical System Requirements Definition. OFERA (Horizon 2020) deliverable, 2018. verified #pub-ofera-2018

Report on performance improvements in rosbag2. ros2/rosbag2 technical report, 2021 (added by adamdbrw). verified #pub-rosbag2-2021

Identification and analysis of gaps in the field of UGV human-machine interfaces. NATO AVT-241 Specialists Meeting, 2015. Authors: M. Maciaś, A. Dąbrowski, J. Główka (order not independently confirmed). self-reported #pub-nato-2015

NATO STO meeting proceedings are not openly indexed.